Tsuneishi Shipbuilding Co., Ltd. (Tsuneishi) completed the construction of its first TESS38 “WECO JOSEFINE” at one of its overseas shipyards, TSUNEISHI HEAVY INDUSTRIES (CEBU), Inc., and delivered it to the shipowner on January 15th, 2018.

This first “TESS38” 38,300-tonne bulk carrier is also capable of log transport and provides greater cargo capacity by realizing energy savings.

Tsuneishi Shipbuilding delivers first “TESS38” Ship – Its 38,300-tonne Log and Bulk Carrier

The “TESS38” is a new Handysize carrier in the TESS series*1, under which over 400 completed vessels have been delivered. Three metres longer than its predecessor, the TESS35, this new vessel has a total length of 180 metres, enabling an increase of 3,000 tonnes in dead-weight capacity for more efficient transport.

Designed to carry a wide range of cargo, including logs, grains, coal and iron ore, the vessel is standard-equipped with a cargo securing device to secure logs on deck and four deck cranes. The cargo hatches on the cargo holds are all fitted with end-folding type hatch covers, and the semi-box type holds themselves are well-suited to the transport of steel products, realising excellent handling efficiency and maintainability.

In addition, Tsuneishi has increased fuel efficiency by 15.4% over its handysize bulk carriers constructed in the 1990s by equipping the ship with MT-FAST*2 (increases propeller propulsion efficiency) and an electronically-controlled engine, and the Shipyard has made the vessel environmentally-friendly through measures such as fitting a Ballast Water Management System (BWMS).

*1 TESS (Tsuneishi Economical Standard Ship) Series

The series had its beginnings in the TESS40, a 40,000-tonne bulk carrier, first completed in 1984. Subsequently, the lineup was expanded to include the TESS45, TESS52 and TESS58 variations. With the launch of the “TESS64 AEROLINE” in May 2014, and the “TESS999” in December 2017, the total number of completed ships has surpassed 400.

*2 MT-FAST

An energy-saving device that fits multiple fins to the front of the propeller to control the water flow and enable propulsion efficiency improvements of approximately 4%. Developed in collaboration with MTI Co., Ltd., a company in the NYK Group.

About WECO JOSEFINE

 Vessel name  WECO JOSEFINE
 Type  D/W38,300 mt type log and bulk carrier
 Length  180 m
 Breadth  30 m
 Depth  15 m
 Load draft  10.45 m
 Deadweight  38,300 metric tons
 Main engine  MAN B&W 6S50ME-C8.5
 Service speed  14.3 knots
 Cargo hold capacity  47,800㎥


Additional Feature:

  • Equipped with “SEAWORTHY” to reduce wave resistance at the bow. Designed to lower resistance even in high waves, and reduce the sea margin when loaded by up to approximately 5%. Developed in collaboration with Hiroshima University.
  • Fitted with accommodation designed to reduce wind pressure. Developed in collaboration with Hiroshima University.
  • A strengthened hull structure to allow for heavy cargo such as steel products.

Source: Tsuneishi